The pallet occupies 48×40×48÷1,728 ≈ 53.3 ft³, so density is 400÷53.3 ≈ 7.5 lb/ft³ — around class 150 on the common density scale. Class is not density alone: NMFC item, handling and liability still apply, and the carrier can re-measure. Shippers often open with “what is your per-mile rate?”, but an LTL floor price comes from class, weight, lane and minimum charge. The cheaper move is usually administrative: declare a commercial dock, confirm no liftgate/residential/appointment, and put it on the BOL. If the address is actually a home, hiding it converts a small saving into a residential fee plus a redelivery attempt.
Freight Cost by Shipment: Six Real Scenarios, One Pallet to a Full Truck
A 500-mile move prices differently at one pallet, six pallets, a full truck and a 4 lb parcel. Break out line-haul, fuel, accessorials, chargeable weight and customs by shipment, with sources and dates.
Six real shipments: count pallets and measure the carton before asking for a per-mile rate
Ranges are U.S. market and dated in each line: FreightRate (published 2026-07-31) and FreightPlus (published 2026-04-28), both accessed 2026-11-03. Some carriers quote fuel per loaded mile, others as a percentage of line-haul; do not add the two conventions together. Any total below is a worked example, not a quote. Cross-border LCL has no single public price here, so we give the billing basis, not a made-up rate.
Six pallets sit in LTL’s awkward middle: enough freight to be handled several times, not enough to fill a trailer. Retail DCs usually require an appointment ($50–85 per stop, FreightRate, 2026-07-31), and a tight window can be classified as limited access ($95–155). Put LTL, partial and a 26-pallet truckload on one sheet and compare door-to-door totals, not line-haul. If the receiver offers a two-hour window, price the wait and reschedule risk too. FreightPlus’s sample invoice starts at $485 line-haul and ends at $1,085.75, with accessorials at 124% of base — an extreme example, but a useful reason to read every line.
A truckload quote normally groups line-haul and fuel, but not waiting, unloading, overnight parking or reconsignment. Filling 26 pallets makes the per-pound number look tiny; the risk moves to the dock. A late appointment, an occupied door, or a BOL weight that differs from the scale can all turn into detention. Write arrival time, unloading responsibility, free time and who pays the lumper into the booking confirmation. Bigger is not always cheaper either: overweight, high-cube, temperature control or hazmat changes the equipment and the quote.
This is the 2025–2026 trap. Since 2025-08-18, UPS and FedEx round every fractional inch up before calculating volume, so 11.1 in becomes 12 in; a light, bulky parcel can gain a pound or two of billable weight. From January 2026, packages over 10,368 in³ trigger additional handling, and over 17,280 in³ or 110 lb trigger large-package/oversize (Sifted, 2025-10-23). Measure the outer carton, not the product. If you can stay under 10,368 in³, fix the void fill instead of buying a bigger box. Carriers bill the greater of actual and dimensional weight, never the sum.
A home has no dock, so carriers commonly bill residential and liftgate together; they are separate lines, not alternatives. If the driver has to move freight inside, inside delivery adds $6–12/cwt with a $120–135 minimum. Ask four questions before booking: dock or no dock, forklift or none, curbside or inside, and fixed window or not. Delivering to a nearby commercial address for pickup is often cheaper than a residential run. Note the difference between changing the address after pickup (reconsignment, $85–165) and retrying the same address (redelivery, $75–160); both can stack on top of the original accessorials.
LCL bills by W/M: one cubic meter or 1,000 kg, whichever is greater. At 350 kg this shipment is 0.35 t, so it pays for 2 revenue tons, not 0.35. When you see “$XX per CBM”, ask what it includes: origin THC, documentation, export clearance, ocean freight, destination THC, import clearance, duty, warehouse rent and demurrage are usually separate. Two cubic meters is also a low-volume shipment, so minimum charges can exceed the simple CBM multiplication. Get one all-in breakdown with Incoterms, HS code and who clears customs before comparing forwarders.
Eight questions to settle before you book
Two LTL quotes differ by $200. What should I compare line by line?
Split each quote into line-haul, fuel (percentage or per mile, and which diesel week), accessorials, transit, cargo liability limit and quote validity. A low line-haul is not a low total: FreightPlus’s sample goes from $485 to $1,085.75, with accessorials at 124% of base. Confirm whether the quote is all-in or excludes liftgate, residential and appointment, and whether it includes the minimum charge and fuel. Then compare the same pickup date, address type, weight and dimensions.
Why is my 400 lb pallet priced around class 150 instead of by weight?
LTL class reflects density, handling, liability and the NMFC item, not weight alone. A 48×40×48 in pallet is 53.3 ft³; at 400 lb its density is about 7.5 lb/ft³, which lands near class 150 on the common density scale, while the same weight in a smaller cube could be class 100. Density is only one input, and the carrier’s re-measure and NMFC classification control. Under-declaring class can produce a post-audit charge or a reweigh fee.
Are liftgate and residential delivery charged together?
Yes, often. A home has no dock, and liftgate and residential are separate line items: common 2026 U.S. LTL ranges are $115–185 per liftgate and $150–225 per residential delivery (FreightRate, 2026-07-31). If neither end has a dock, liftgate can be charged twice; add appointment ($50–85) and inside delivery and the accessorials can exceed line-haul. Declare the address type and unloading capability on the BOL before dispatch.
What is the difference between reconsignment and redelivery?
Reconsignment changes the delivery address or moves the freight to a different stop after pickup, commonly $85–165. Redelivery retries the same address after a failed attempt, commonly $75–160 (FreightRate, 2026-07-31). Both are usually triggered by an absent receiver, a wrong address, a missing appointment or a refusal. Confirm the window, phone number, gate and dock instructions, then reconfirm a day ahead; if the address may change, change it before pickup.
At how many pallets should I stop quoting LTL and ask for a truckload?
There is no universal pallet count, but from roughly six pallets or 3,000 lb, quote LTL, partial and truckload together — especially with an appointment, a tight window, multiple handling points or high-value freight. LTL prices per shipment and can add accessorials at every stop; truckload prices per truck and adds waiting and unloading separately. Compare door-to-door total, transit days and liability, not cost per pound. A full 26-pallet 53 ft load is normally truckload territory, but weight and loading still decide the equipment.
Why is a 4 lb parcel billed at 19 lb?
Carriers charge the greater of actual and dimensional weight. An 18×14×10 in carton is 2,520 in³; divided by 139 it is 18.1 lb, rounded to 19 lb, so the 4 lb scale weight loses (Sifted, 2025-10-23). Since 2025-08-18, UPS and FedEx round each fractional inch up before multiplying, which inflates light, bulky parcels; from January 2026, over 10,368 in³ also triggers additional handling. Measure the outer box, reduce void space and right-size the carton before disputing the invoice.
Is the fuel surcharge a percentage or a per-mile charge?
Both conventions exist, and they must not be added together. U.S. LTL carriers commonly use a stepped table tied to the weekly DOE diesel index and charge a percentage of line-haul; FreightPlus’s 2026-04-28 example uses 45% and shows a 44–48% band at $5.40/gal diesel. FreightRate quotes $0.42–0.55 per loaded mile (2026-07-31). Ask which index, which week, whether line-haul already includes the minimum, and whether fuel is a percentage or a mileage charge; then verify the two lines separately.
An LCL quote says “$XX per CBM”. Why can’t I multiply by volume?
LCL bills by W/M — one cubic meter or 1,000 kg, whichever is greater — and “per CBM” is usually only the ocean leg. A 2 CBM/350 kg shipment pays for 2 revenue tons, not 0.35 t, and low-volume shipments can hit minimum charges. A full cost stack includes origin THC, documentation, export clearance, ocean freight, destination THC, import clearance, duty, warehouse rent/demurrage and delivery. Ask for one all-in breakdown with Incoterms, HS code and customs responsibility, then compare forwarders.
Popular topics
Start with the 2 most-read topics, or search everything.
Start here
Don't get lost: start with the picks, then expand by topic.
All content
Filter by keyword; each guide has steps, common mistakes and a checklist.
How to use this site
Pick a real problem
Start from a recommendation or search, not the first page; find the problem you need to solve now.
Follow the steps
Each guide gives steps, common mistakes and a checklist; do the smallest step first, then iterate.
Review with the checklist
Check your work with the checklist; drop what does not fit and keep the repeatable process.
Why read this
Not vague concepts
Every guide lands on steps, templates, mistakes and a checklist you can actually use.
No invented results
No promises of income, traffic or admission; professional topics state limits and point to experts.
Kept updated
Last updated 2026.11.03; content grows from feedback instead of one-off empty pages.
Affiliate disclosure: this page may contain affiliate links. We may earn a commission if you buy through them, at no extra cost to you.